工业技术
Do you need to upgrade the skills of your staff? 中央社区学院 offers an extensive list of courses related to industrial maintenance. These courses can be offered at the college or on site. We can customize our training programs to meet your organization’s unique needs and culture.
我们的课程提供便利, flexibility and relevance because they are based on real-world applications and taught by industry experts. In addition, our flexible training ensures that you get exactly what you need, when you need it.
You’ll find the classes we offer listed below, and you can expand the tabs to see course descriptions. You can find upcoming courses with our 社区 & 行业类别搜索. Please remember that we also can customize classes to meet your specific needs.
This three-day session is intended to provide the skills needed to write, enter and test SLC 500 programs using the advanced programming instructions and RSLogix 500 software. Hands-on practice is provided using trainers and simulators with actual SLC 500 system control stations.
Prerequisite: General knowledge of machine controls and a basic understanding of programming PLCs.
- plc基础回顾
- 比较说明
- 移动和逻辑指令
- 屏蔽
- 程序控制指令
- 移位寄存器
- Stacking instructions (FIFO and LIFO)
- 数据处理说明
- 索引和间接寻址
- 测序仪
- 在线编辑
- 迫使
- I / O中断
- Write, enter and test advanced program instructions
This three-day session is intended to provide generic background theory, applications information and programming practices. Who should attend: Anyone who uses specifies or maintains PLC-based systems such as engineers, 维修技术人员, 销售或应用人员.
Prerequisite: Basic electricity and general knowledge of machine controls.
- General PLC information and history
- I/O硬件概述
- 软件的介绍
- Introduction to the basic programming instructions
- Setting up the communication link
- Downloading and going online with a controller
- PLC numbering systems and conversions
- PLC数据文件和寻址
- 典型接线连接
- Converting relay logic diagrams to PLC commands
- Timers, Counters and typical applications
- Designing ladder logic programs
- PLC系统故障排除
- Typical Industrial control projects
Hands-on practice is provided using custom Allen Bradley MicroLogix 1500 trainers with RSLogix 5000 and RSLinx software.
This three-day session is intended to provide the basic skills needed to understand the RSLogix 5000 software and Logix family of programmable automation controllers. Participants will use AB’s CompactLogix controller with a Festo I/O simbox and EasyVeep simulation software to reinforce the learning objectives.
Prerequisite: General knowledge of window-based operating systems. Basic understanding of machine controls.
- Understanding of Control Systems
- Overview of the Logix family of hardware
- Identifying RSLogix 5000 software components
- Identifying industrial networks
- Creating and organizing a project
- Programming basic ladder logic offline
- 配置RSLinx
- Uploading and downloading to the controller
- 创建和编辑标记
- 别名标签
- Monitoring and editing projects online
- Entering and editing instructions
- 项目
At least half of the class is devoted to hands-on experience on the CompactLogix trainers in order to achieve optimum retention and development of practical application skills.
This three-day seminar is a common sense guide to learning electrical principles and troubleshooting.
The course is a combination of presentation and hands-on training with custom made consoles, taught from a troubleshooting perspective. Approximately 50% is devoted to hands-on exercises to achieve optimum retention of practical application skills.
- Electrical terminology and units of measurement.
- Ohms law presentation and examples.
- 电气安全工作守则.
- Series circuit rules and troubleshooting techniques.
- 串联电路实验室.
- Parallel circuit rules and troubleshooting techniques.
- 并联电路实验室.
- Using a digital multimeter for resistance, voltage and current measurements.
- 触电危险和接地.
- Basic wire sizing and color coding.
- Characteristics and testing of switches, fuses, transformers, etc.
- Use and design of schematic drawings for wiring and troubleshooting circuits.
Digital multimeters are provided for participant use during the training. If you prefer, bring the meter used in your daily work. Participants are encouraged to bring a calculator.
This two-day training seminar is a guide to learning Technical Diagrams. Electrical, hydraulic, pneumatic drawing, diagrams and schematics are included. This course is a combination of lecture and presentations taught from a troubleshooting perspective.
- 电气图形图
- Single and ladder style line drawings
- 简单的交流和直流电路
- Simple series and parallel circuits
- Schematic line and connection descriptions
- Understanding electrical symbols
- 原理图标题块
- Pneumatic and hydraulic diagrams
- Piping schematics, to include local areas and phantom lines
- Identifying fluid power connections
- Orthographic # Isometric Projections
- Valve Identification and schematic symbols
This three-day training seminar is a common sense guide to learning 机械系统 and Power Transmission. This course is a combination of presentations and hands on training taught from a troubleshooting perspective.
- Fundamental laws and principles of mechanics and mechanical reasoning.
- Simple machines (gears, pulleys and levers)
- Subjects to include but not limited to force, torque, work and power
- Identify different types of gears, belts and pulleys
- Identify bearing types and usage, to include failure analysis
- Fastener identification and bolt grades
- Hand tool identification and proper usage, including drilling and tapping
- Industrial measurement techniques, including the proper use of steel rules, calipers and micrometers
- 润滑技术
- 链条和链条传动
- 离合器、制动器和联轴器
- 密封剂和粘合剂
This three-day training seminar focuses on motor control and relay logic. The workshop is a combination of presentation and hands-on training taught from a troubleshooting perspective. Fifty percent of the class time is devoted to a hands-on experience with the custom trainer consoles in order to achieve optimum retention and development of practical application skills.
- Review of electrical fundamentals
- Single- and three-phase AC power systems
- Electrical safety considerations
- Characteristics of three-phase motors
- Motor starters: theory and operation, sizing, overload selection/setting, full voltage and reversing
- Two- and three-wire control: Start, stop, jog, overload indications, etc.
- Theory and use of relays, timers and other control devices
- Industrial symbology and line logic design
- Use of line and schematic drawings in troubleshooting
- Plenty of hands-on wiring and troubleshooting of control circuits
While digital multimeters are provided please feel free to bring the DMM that you normally would use at your place of employment.
This four-day course uses a combination of training methods. Topics are covered in a lecture format along with student workbooks. The student will then design circuits using a computer layout and simulation program. 一旦电路检查完毕, it is constructed and operated on the trainer board using actual valves, cylinders and compressed air source.
- Cylinders: single and double acting
- Control valves: position and way combinations
- 气缸方向控制
- 气缸转速控制
- 气缸力控制
- 压缩空气供应
- Fluid power symbols and schematics
变频驱动
This two-day course gives 维修技术人员, specifiers and supervisors insights to VFD theory and operation, 安装注意事项, problem solving in existing systems and familiarity with typical setup parameters.
变频驱动 (VFDs) are increasingly used in motor speed control applications. They are becoming more cost effective and continue to offer greater capability and reliability. 学生 will make the drive perform various functions through programming parameters and wiring connections. A workbook and reference material will be provided.
- Three-phase induction motor information
- VFD capabilities and theory of operation
- VFD键盘操作界面
- VFD设置和参数输入
- VFD启动和停止方法
- 变频器调速方法
- VFD 安装注意事项
- Using VFDs for energy efficiency
- VFD fault diagnosis and troubleshooting
Approximately half of the class is devoted to hands-on experience on the custom AB PowerFlex 525 training stations in order to achieve maximum retention and development of practical application skills.